Twin screw extrusion
Vol. 25 #2, Sept. 1998
When transferring screw designs between twin screw extruders having different L/D ratios, address the design analysis on three levels: overall length, relative length of solids and melt conveying zones, and functional zones such as preheating, melting, mixing, and pumping. Compare lengths in terms of L/D ratios.
- Kun Sup Hyun, The Dow Chemical Co.
See also:
- Drive ratio
- Twin scale uP
- Twin screw changes
- Twin screw extruder
- Twin screw extrusion 2
- Twin screw extrusion (3/99)
- Twin screw help
- Twin screw installation
Return to
Extrusion Hints