Cool Dryer Return Air
Modified on Monday, 02 February 2015 01:01 PM by mpieler — Categorized as: Extrusion Hints
Cool Dryer Return Air
Vol. 26 #2, September 1999 and Vol. 26 #3, December 1999
When using a dehumidifying dryer to pre-dry moisture sensitive hygroscopic resins, it is important to monitor the dryer’s return air temperature carefully. If the return air temperature climbs above 150°F, the moisture loading capacity of the dehumidifying dryer will be reduced below its design specifications. A return air temperature of 180°F will reduce the dryer’s moisture loading capacity by 50%. It will also greatly shorten the life of the dryer’s blower.
- Pete Stoughton, Conair
See also:
Closed loop dryer
Dryer inlet air
Installing a dehumidifying drying system
Return to
Extrusion Hints