Feed Section

Modified on Sunday, 01 February 2015 05:52 PM by mpieler — Categorized as: Extrusion Hints

Feed Section
Vol.20 #1, Mar., 1993

Unfortunately, the feed sections of most of our extruders are uncontrolled. Consequently, we see a range of temperatures from slightly over freezing to boiling.

The ideal feed section temperature for PVC pellets is 70 to 80 degrees F (room temperature). This will eliminate bridging and avoid condensation. Control the water flow to maintain a more consistent temperature and not waste water.

See also:
Return to Extrusion Hints